Modify Selection
- Products and materials:
- Respirable dust
- or
- Diesel particulate matter
- or
- Coal dust
- or
- Silica dust
- or
- Limestone dust
- or
- Float dust
- Document types:
- Peer reviewed journal articles
Home Links
Results 101 - 110 of 120
-
4/1/2005 - Peer reviewed journal articlesA diesel particulate matter analyzer capable of direct, real-time measurement of engine exhaust particulate is necessary to effectively institute source control technology currently being used on diesel equipment and to ensure that the control measures ...
-
1/1/2005 - Peer reviewed journal articlesInvestigates the ability of the SKC DPM cassette to collect diesel particulate matter while segregating ore dust from the sample.
-
1/1/2005 - Peer reviewed journal articlesDiscusses a cooperative research effort to lower respirable dust levels in an enclosed cab on an older surface drill at a silica sand operation. A number of modifications were incorporated into the drill's filtration and pressurization system, as well a...
-
10/1/2004 - Peer reviewed journal articlesA monitoring method for diesel particulate matter was published as Method 5040 by the National Institute for Occupational Safety and Health (NIOSH).
-
6/1/2002 - Peer reviewed journal articlesExperiments were conducted to determine the optical scattering properties of diesel particulate matter (DPM) and various combustion aerosols from both flaming and smoldering combustion sources at discrete angles of 151 and 301 in the forward direction...
-
6/1/2002 - Peer reviewed journal articlesThe amount of airborne respirable dust generated from breakage of different coals varies widely. This research was conducted to identify the facets of airborne respirable dust liberation from the coal product.
-
2/1/2002 - Peer reviewed journal articlesThis article summarized results of research conducted by the National Institute for Occupational Safety and Health (NIOSH) at its Pittsburgh Research Laboratory. The objective of this work was to determine the correlation between the mass (M) of respir...
-
9/1/2001 - Peer reviewed journal articlesThe objectives of this work are to 1) evaluate the performance of the P7 method on field samples of low quartz mass loadings, 2) evaluate the magnitude of dust mass spatial variability within an enclosed cab environment, and 3) estimate the subsequent p...
-
9/1/2001 - Peer reviewed journal articlesA method was developed to estimate the average workplace concentration of DPM that could be expected from using the new lower DPM-emitting engines now being approved by MSHA.
-
6/1/2001 - Peer reviewed journal articlesThis paper describes laboratory experiments in a wind tunnel with a roll crusher to identify relationships among crushing parameters, product size, coal rank properties and airborne dust generation.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program